To conserve our planet's most precious resources - water, air, soil and energy through 360° environment solutions...
| Product & Services |
Waste Treatment & Recycle
Product & Services
Raw Water Treatment
Process Water Treatment I
Process Water Treatment II
Drinking Water Treatment
Waste Treatment & Recycle
Waste Treatment & Recycle
Sequential Batch Reactor
Vehicle Wash Recycle System
Designed to treat and recycle vehicle wash effluent. It uses electro coagulaton and ultra filtration membrane technologies to remove free floating and emulsified oil, grease and suspended particles – organic and inorganic, as well as colour and odour, making the water fit for reuse. Conserves large volumes of fresh water, saving up to 80% water costs while enabling compliance with environmental discharge regulations. Compact, skid mounted system is totally automated.
Tilted Plate Interceptor
Dissolved Air Flotation
Induced Gas Filtration
Ultra High Rate Clarifier
Compact, efficient, low cost clarifier combines technologies and advantages of solids contact clarifier and lamella clarifier, with enhanced performance at increased rise rate.
Combines mixing, reaction-flocculation, clarification, and sedimentation/sludge removal and recirculation in a single treatment basin for maximum treated water production in minimal space. Handles high inlet suspended solids load upto 3000 ppm while giving consistent treated water quality of <20 ppm.
High Rate Solids Contact Clarifier
High performance clarifier incorporates design of internal solid recirculation, optimising chemical consumption and making it more economical than conventional clarifiers. Works on principles of coagulation/flocculation and hydraulic separation to produce clarified water of the highest quality; flash mixer, flocculation and thickener mechanism are inbuilt. They reduce chemical requirement, save space and are easy to operate.
Series of inclined plates (lamellae) achieve effective solid-liquid separation. Large settling surfaces concentrated within relatively small floor area, so for same liquid flow, occupies 1/10th footprint of conventional clarifier. Laminar, stable flow and excellent effluent quality; modular design, no moving paths, removable plates can be lifted easily and cleaned with operation shutdowns.
Reliable and cost-effective disinfection system produces chlorine dioxide safely and efficiently. Gas and acid-based production technologies, high chlorine dioxide generation efficiency, low chlorine residual. HAZOP study conducted. Easy to use with low maintenance and operating control. Ideal for drinking water treatment, disinfection in cooling circuits, process and waste water as well as swimming pools.
An on-site integrated system which produces oxidants from salt water feed for disinfection of water. The electrolytic cell is at the heart of the system and the disinfectant is produced by electrolysing salt solution. Designed for continuous operation, except during cleaning and maintenance, it can produce a maximum of 0.8 kg mixed oxidants. Ideal for drinking water treatment, swimming pool treatment and applications in industrial process and cooling water treatment.
Range of products varies from small lab generators generating 4 gm/h to large XF generators generating over 97 kg/h from a single unit. The product range also includes innovative ozonators for high purity application which generates ozone from pure water. The range also includes containerised ozone generator system capable of generating over 250 kg/h.
Wide range of speciality UV systems include low and medium pressure UV systems for applications ranging from general water disinfection and drinking water disinfection to high purity water disinfection, TOC reduction and deozonation.
Biological Treatment Systems
Packaged Sewage Treatment Plant
Fluidised Media Reactors
Designed as a single tank unit, it incorporates bar screen chamber, specially developed synthetic media to facilitate attached growth process, oxygen transfer through diffused membrane aeration, lamella settler and chlorine contact tank for disinfection. Compact, minimum power and chemical usage, low operating cost.
New Generation Packaged Sewage Treatment Plant
A unique combination of lamella plate clarification and aeration results in a ready-to-operate, pre-fabricated solution of outstanding performance and efficiency. All-in-one compact single tank plant, modular design, simple operation, minimal maintenance.
Among the latest technologies in biological treatment, effective submerged membrane filtration produces high quality permeate from domestic sewage and industrial waste water without using any chemicals. Single packaged unit, minimal civil construction, modular construction and design, compact, lower energy consumption and up to 6 log (99.999%) removal of total coliform.
IPC Membrane Bio-Reactor
INDION Eco MBR
INDION Eco MBR is an extension of the proven membrane bio-reactor process designed to treat smaller capacities of effluent while producing high quality treated water for discharge and reuse without use of chemicals.
Ideal for Individual homes, bungalows, transit camps, labour colony, construction site and any decentralized effluent treatment facility.
IPC Membrane Bio-Reactor
Anaerobic Biological Treatment
Upflow Anaerobic Sludge Blanket Reactor (UASB)
Continuous Stirred Tank Reactor (CSTR)
Upflow Anaerobic Contact Reactor (UACR)
Anaerobic Filter (AF)
Aerobic Biological Treatment
Sequential Batch Reactors
Among the latest technologies in biological treatment, effective submerged membrane filtration produces high quality permate from domestic sewage and industrial waste water, without using any chemicals. Single packaged unit, minimal civil construction, modular construction and design, compact, ower energy consumption, upto 6 log (99.999%) removal of total coliform.
Moving Bed Biofilm Reactors (MBBR)
Continuous Activated Sludge Process (LUCAS-SBR)
Conventional Activated Sludge Process
Barden PHO Process
Constructed Wet Lands
Reed Bed System
Tertiary Treatment & Recycle Systems
Multi Grade Filter / Pressure Filters
Multi Grade filter is a depth filter that makes use of coarse and fine media mixed together in a fixed proportion. This arrangement produces a filter bed with adequate pore dimensions for retaining both large and small suspended particles. This filter performs at a substantially higher specific flow rate than conventional filters. Specific flow rates of 15 – 30 m/h have been successfully obtained for treating waters containing 25 – 50 ppm suspended solids respectively to produce filtrate with less than 5 ppm.
Activated Carbon Filters
Wide range of activated carbon in granular, powder and extrudate forms. These low leachability products are effective in reduction of oil & organics, decolourising and deodourising.
Continuous Sand Filter
Continuous upflow filter can filter influent containing up to ten times more dirt than a conventional filter. This revolutionary sand filter does not require to be backwashed to keep the filter bed clean as the sand bed is continuously cleaned and regenerated by internal recycling. This ensures uninterrupted operation without stopping for backwash. The continuous operation results in a constant and low pressure drop. Maximum clean filtrate is assured since the filter bed always contains a certain amount of solids which improve filtration. This mode of operation also enables the filter to accept a highly polluted flow with high efficiency. The unique cleaning method means backwash water storage tanks and backwash pumps can be dispensed with.
Automatic Valveless Gravity Filter
Automatic valveless gravity filter (AVGF) operates automatically, on the loss of head principle - generally accepted as the most accurate control besides the constant analysis of the filtered water turbidity, which is seldom practical on a continuous basis. The head loss at which AVGF initiates backwashing is determined by the height of the inverted U-turn at the top of the backwash pipe. The level of water in this pipe is proportional to the head loss across the filter bed.
Reverse Osmosis Systems
Ultra Filtration Systems
Electro Dialysis Reversal
Ion Exchange Units
Comprises a family of automatic twin-bed deionizers incorporating state-of-art counterflow ion exchange technology. Operation cycle of these rapid-regeneration, skid-mounted, packaged units are controlled by volume throughput, which is pre-programmed into the PLC according to the type of feed water. The ion exchange resins are never fully exhausted ensuring optimum deionised water production at all time. Regeneration of cation and anion beds is simultaneous, so effluent streams are largely self-neutralising, reducing waste disposal costs and environmental impact.
Reject Containment / Zero Discharge
Hybrid - Thermal & Mechanical Vapour Compression (TVC/MVC)
Waste To Energy Systems
ANDICOS Water to Energy System